|
|
|
|
Joined: Sep 2006
Posts: 24
Member
|
|
Member
Joined: Sep 2006
Posts: 24 |
Anyone had any luck connecting a 3DCI to a 28i with software version 6.01.01.
I programmed it:
1- Prog 0005 = type 4.
2- Prog 0404 = Port 6 for Ext 306.
3- Prog 0417 = xx.
4- Prog 1206.
5- Using stright thu Rs232 to Db9.
6- I get ( ok ) with hyperterminal. But no smdr.
Any cooments will be highly appreciated. :rolleyes:
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2005
Posts: 29
Member
|
|
Member
Joined: May 2005
Posts: 29 |
In 0005, what order number did you give it? I believe order number 1 will assign it to DCI ports 37,38,39. Some of your program number are different then what I see under 6.0.xx, so it may be different.
Can you make a "data call" between two of the ports on the 3-DCI?
Of course, if you're the guy who out-bid me on ebay for that 3-DCI then I retract my post :-)
|
|
|
|
|
Joined: Sep 2006
Posts: 24
Member
|
|
Member
Joined: Sep 2006
Posts: 24 |
|
|
|
|
|
Joined: Mar 2006
Posts: 193
Member
|
|
Member
Joined: Mar 2006
Posts: 193 |
Using a 3DCI on an optima 28i/124i/384i & 704i uses DCI ports 145,146 & 147 in programming..
|
|
|
|
Forums84
Topics94,514
Posts639,943
Members49,846
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
