|
|
|
|
Joined: Sep 2004
Posts: 188
Member
|
|
Member
Joined: Sep 2004
Posts: 188 |
Hi, I have a customer that decided to rearrange his own station wiring and cut the CAT5 feeding 2 Onyx ASI's. I have the wiring repaired and have dial tone on both single line sets but no incoming ring on intercom or outside lines, the green led on the ASI doesn't flash on incoming ringing and when you pick up the handset you cannot answer the call but you do get the red off hook indicator on the ASI. When I plug a onyx digital set into the port feeding the ASI I get ringing on all the correct lines. Is there any other way to test the ASI? Sorry its been a long time since I worked on one of these systems. Thanks in advance.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
I would plug a SLT directly into the ASI and work from thee. you could also try powering them down for a while but my guess is he blew them ..
did you look to see that those ports are still set up as SLT and not digital ?
If your digital phone worked then the programing is off
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
Forums84
Topics94,515
Posts639,961
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (RATHER BE FISHING),
213
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
