|
|
|
|
Joined: Jul 2009
Posts: 27
Member
|
OP
Member
Joined: Jul 2009
Posts: 27 |
I have a 384i that cannot be accessed by terminal through the 3 dci module. I tested the 3 dci, cable, pc at another 384i and all are good. I enter atdt#*#* and get "no carrier". when I reset the software port through command 1206 I get an OK back. I make whatever port I'm using a type 4 order 1 in 0005. This was working until a few months ago-and I already rebooted the system.I checked the entire list of ports in 0005 and there was no conflict with another port. Any ideas? thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
162
guests, and
413
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
