|
|
|
|
Joined: Aug 2002
Posts: 1
Member
|
|
Member
Joined: Aug 2002
Posts: 1 |
Hi~
I did something I believe was stupid today and need your expertise to undo it. I was trying to check our voicemail on our Nortel Norstar system (the new person's voicemail wasn't answering supposely) and I called our number from our phone. I received another line, but when I tried to go into the voicemail, I lost connection somehow (not real sure how) and now I have two lines that I can't get into. When you hit either of the lines, it shows the message 'line in use'. The lines aren't on anyones phone so I can't just pick up the phone and terminate the call there. Is there anyway I can get into one of the two lines and disconnect?
Thanks for any and all help!
Valerie
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jun 2001
Posts: 10,631
RIP Admin-Founder
|
|
RIP Admin-Founder
Joined: Jun 2001
Posts: 10,631 |
reset the system:
Unplug the power, give it 5 min. then power it back up again.
That should do it.
|
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
Test-ok has the best answer. Reset! Your two lines were locked up in the voicemail. Resetting will fix your problem. Good Luck!!
If all else fails, use a BFH.
|
|
|
|
|
Joined: Jul 2002
Posts: 5
Member
|
|
Member
Joined: Jul 2002
Posts: 5 |
Also check your line programming to ensure that you have Trunk Mode set to Super. This may help this from happening again.
|
|
|
|
Forums84
Topics94,518
Posts639,984
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
205
guests, and
58
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
