|
|
|
|
Joined: Sep 2001
Posts: 2,360 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,360 Likes: 9 |
Sorry for what is probably a newbie question,but is there an easy wat to make the lines ring over the paging speaker at night?I am guessing I need to set up a service mode for day and night and then add the external page port in on the night service ringing?
Thanks in advance.
Paul
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jun 2001
Posts: 10,631
RIP Admin-Founder
|
|
RIP Admin-Founder
Joined: Jun 2001
Posts: 10,631 |
What system are you wanting to do this on?
|
|
|
|
|
Joined: Sep 2001
Posts: 2,360 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,360 Likes: 9 |
|
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
Auxiliary ringer(customer supplied)
The Norstar ICS provides a control contact to operate an auxiliary ringer.
1. Follow the manufacturers installation instructions.
2. Connect the auxiliary ring generator to the 25-pair distribution block as shown in the wiring charts. The pins in the chart provide a control contact. They do not provide ring current or dc voltage. The contact is capable of switching a maximum of 50 mA and a maximum voltage of 40 V dc.
Auxiliary ringer programming
The auxiliary ringer can be activated by setting auxiliary ring for specific
external lines, and auxiliary ring for specific telephones. Refer to the
Programming chapter for details.
Turning the auxiliary ringer for a telephone on or off .
Enter system programing
Press ÂSHOW at Terminals&Sets.
Enter the internal number of the telephone you want to program and press ÂSHOW.
The display reads Capabilities.
Press ÂSHOW.
Press NEXT until the display reads AUX.Ringer
Use to select (Yes) or (No).
You can program the auxiliary ringer to start ringing for incoming lines as part
of Ringing Service.
Good Luck!!
If all else fails, use a BFH.
|
|
|
|
Forums84
Topics94,516
Posts639,970
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
