|
|
|
|
Joined: Sep 2003
Posts: 3
Member
|
|
Member
Joined: Sep 2003
Posts: 3 |
I have a ATA installed which works good except when using a modem it drops the call everytime but when using a test set call does not drop.Is there something in programming I'm missing or do you need a ATA-2? Modem works good as well when connected to outside line.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Sep 2003
Posts: 2
Member
|
|
Member
Joined: Sep 2003
Posts: 2 |
Have you tried replacing the ATA with another one.
|
|
|
|
|
Joined: Sep 2003
Posts: 3
Member
|
|
Member
Joined: Sep 2003
Posts: 3 |
Not yet but will! I could not remember the difference between the ATA & ATA-2. I believe the only difference is modem speed.Someone correct me if I am wrong.Curious if there was anything I was missing because a standard call works but modem drops! Could just be the ATA is bad.I will try another one!
|
|
|
|
|
Joined: Mar 2001
Posts: 577
Member
|
|
Member
Joined: Mar 2001
Posts: 577 |
How is the ATA programmed...line appearances, etc?
|
|
|
|
|
Joined: May 2003
Posts: 10
Member
|
|
Member
Joined: May 2003
Posts: 10 |
Ok, going to lack a little on details, but i've had this problem before and solved it. In some systems, there's a setting ATA ANS. TIME (in cappabilities/set abilities I think) Fiddle around with this number, if it's high, put it low, and vice versa... this has worked for me before. At the same time, anyone able to tell me what this feature does exactly ???
Meridian Man
|
|
|
|
Forums84
Topics94,513
Posts639,940
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, C5Z),
170
guests, and
51
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
