|
|
Joined: Nov 2003
Posts: 8
Member
|
|
Member
Joined: Nov 2003
Posts: 8 |
Can someone offer their knowledge.
Question: What is the best way to connect two Norstar MICS's?
G O B U C K S !!!!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
Point-to-point T1. You program it just like you would for Tie lines between systems.
Good Luck!!
If all else fails, use a BFH.
|
|
|
|
|
Joined: Apr 2001
Posts: 1,390
Member
|
|
Member
Joined: Apr 2001
Posts: 1,390 |
i do this all the time. t1 is quite costly to waste on voice. however if you need just a couple of line between the systems, use em cards.
|
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
May not be the BEST way, but a quick and easy way is to use an ATA or two. Sys-A uses ATA-out to LINE-IN on Sys-B. Another ATA-out on Sys-B to LINE-IN on sys-A. Dial the ext of the ATA and the other sys think a CO line is ringing. Configure the line as any other line or have AA answer and then select any extention. This only works if the systems are within the same building or close by.
[This message has been edited by NTlayoff (edited December 22, 2003).]
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Mar 2002
Posts: 157
Member
|
|
Member
Joined: Mar 2002
Posts: 157 |
Yeah, the first questions are: How far apart are they and how much trunkage do you need between them? (Go Blue!)
|
|
|
|
|
Joined: Mar 2001
Posts: 3,268
Member
|
|
Member
Joined: Mar 2001
Posts: 3,268 |
On this same topic: Customer has MICS, with 2 PRIs, NAM, 0x16s, and 1 fiber port open on 6 port expansion module. The physical location is a large 3 floor building. Customer owns bldg. Customer would like to expand another 35 stations. Can we tie this and another MICS together? Are E&M cards the way to do it? Can we just use dry pairs?? Operationally, how does this work? What are the dialing procedures? Thanks in advance.
|
|
|
|
|
Joined: Apr 2001
Posts: 1,390
Member
|
|
Member
Joined: Apr 2001
Posts: 1,390 |
<font face="Verdana, Arial" size="2">Originally posted by JWRacedog:
On this same topic: Customer has MICS, with 2 PRIs, NAM, 0x16s, and 1 fiber port open on 6 port expansion module. The physical location is a large 3 floor building. Customer owns bldg. Customer would like to expand another 35 stations. Can we tie this and another MICS together? Are E&M cards the way to do it? Can we just use dry pairs?? Operationally, how does this work? What are the dialing procedures? Thanks in advance. </font> if what you are saying is accurate, then upgrade to xc software. run 50 pair riser to the third floor, add another 6port expansion card; combo if you have a service card using the open slot, three more 0x16, your good to go.
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
<font face="Verdana, Arial" size="2">Originally posted by JWRacedog:
On this same topic: Customer has MICS, with 2 PRIs, NAM, 0x16s, and 1 fiber port open on 6 port expansion module. The physical location is a large 3 floor building. Customer owns bldg. Customer would like to expand another 35 stations. Can we tie this and another MICS together? Are E&M cards the way to do it? Can we just use dry pairs?? Operationally, how does this work? What are the dialing procedures? Thanks in advance. </font> If they already have two t-1's you would not be able to connect them via a PTP T-1. two is max of course. Using a PTP or dry pairs is great because you can drop and insert with data channels.
|
|
|
|
|
Joined: Jan 2004
Posts: 1
Member
|
|
Member
Joined: Jan 2004
Posts: 1 |
actually the new 6.1 norstar can support 3 t-1's. just fyi.
|
|
|
|
Forums84
Topics94,523
Posts640,000
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
247
guests, and
37
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
