|
|
Joined: Aug 2004
Posts: 13
Member
|
OP
Member
Joined: Aug 2004
Posts: 13 |
Installed new PRI T-1 on 6.1 software. Cannot make international calls. After user enters 7 to 8 digits, the local operator will come on line. All other calls go thru ok. International calls can be made from pots lines. ????
bt
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
Contact vendor of T1, and make sure International calling is turned on fot T1. If they do not allow International calling, you either get operator or recording saying can not complete call as dialed.
Good Luck!!
If all else fails, use a BFH.
|
|
|
|
|
Joined: Aug 2004
Posts: 13
Member
|
|
OP
Member
Joined: Aug 2004
Posts: 13 |
<font face="Verdana, Arial" size="2">Originally posted by JJ:
Contact vendor of T1, and make sure International calling is turned on fot T1. If they do not allow International calling, you either get operator or recording saying can not complete call as dialed.
Good Luck!!</font> International calling is turned on. Problem is with digits dialed out. bt
bt
|
|
|
|
|
Joined: Apr 2002
Posts: 305
Member
|
|
Member
Joined: Apr 2002
Posts: 305 |
There is a problem with the 6.1 s/w with PRI set as NI2 protocol, Nortel issued an MR(maintenance release) to correct that problem with 6.1 s/w it has the updated protocol table entries for the NI2 current international standards. So I will suggest check your s/w if it’s not the new updated s/w Check system version it should end up with G05 not E06,If it’s the old s/w you should replace it and it will correct the problem. I hope that helps.
|
|
|
|
Forums84
Topics93,959
Posts637,375
Members49,702
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
125
guests, and
40
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
