web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Nov 2001
Posts: 81
Member
Member
Offline
Joined: Nov 2001
Posts: 81
Is is possible for the individual DID's to be sent out from the pbx. I have OLI on the sets but the carrier says he is not seeing my caller id. Here is the PRI trap from the carrier - am i missing a setting or can this not be done?
They are not seeing a calling DN from my pbx

Event 6 04/10/06 16:02:29 TEI 0
TRIG
08 Q.931 Call Control Message
Call Reference Value Orig 16
M 05 Message Type SETUP
I 04 Bearer Capability Length = 3
80 Coding Standard CCITT
Info Transfer Cap. Speech
90 Transfer Mode Circuit
Transfer Rate 64 kbit/s
A2 Layer 1 Protocol G.711 u-law
I 18 Channel Identification Length = 3
A1 Interface ID Implicitly Defined
Interface Type Primary
Preferred/Exclusive Preferred
D Channel Indicator Not D Channel
Channel Selection As Indicated
83 Coding Standard CCITT
Coding Type Number
Channel Type B Channel
8B Channel Number 11
I 70 Called Party Number Length = 12
80 Type of Number Unknown Type
Numbering Plan Unknown Numbering Plan
Number 19495551212

Raw Hex Data
08 02 00 10 05 04 03 80 90 A2 18 03 A1 83 8B 70
0C 80 31 39 34 39 32 36 35 32 31 39 34

Nortel Phone System Service
VoIP Demo

Nortel Phone System Service in Canada


Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Joined: Aug 2004
Posts: 1,743
Likes: 49
Admin
*****
Admin
*****
Joined: Aug 2004
Posts: 1,743
Likes: 49
What sort of PBX are you talking about? Option 11, SL-1, or do you mean a Norstar?

Whoops, I see you answered that question in your Topic Heading.

I'm afraid I don't know whether Norstar is capable of sending outgoing CID. I can't think of where you'd input the number in programming off the top of my head.

[This message has been edited by Toner (edited October 06, 2004).]


[Linked Image from web.atcomsystems.ca]
Looking for a VoIP Phone Canada provider? Put Atcom's valuable VoIP expertise to work for your business today!
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630
you mean on a MICS, right? You can't do T-1 on a CICS.


Z-man
Avaya SME Authorized Partner
www.omniofficetech.com
Joined: Jan 2005
Posts: 7
Member
Member
Offline
Joined: Jan 2005
Posts: 7
I just did a install on a MICS 6.1 with a PRI. All I did to get CLID to work was made sure the LEC was sending the correct number of digits and set my OLI on the sets with there DID numbers.

Joined: Nov 2003
Posts: 1,310
Member
Member
Joined: Nov 2003
Posts: 1,310
FWIW: The Telco's equipment might not be compatible. I set up two (nearly) identical systems (MICS w/PRI) within the same geographic area. One client, using BellSouth could not block or manipulate their out-bound CID. The other client, using a local carrier (USLEC) had no problems doing so.

D. Ocean
Miami, FLA


D. Ocean
Miami, FL

Moderated by  MooreTel 

Link Copied to Clipboard
Newest Topics
NEC IP Phones
by juno - 04/04/25 09:05 AM
NEC IP phones rebooting
by jpet621 - 04/03/25 03:03 PM
SV9100 store hours mailbox
by muddybl - 04/03/25 02:10 PM
Samsung Os 7400 Pri Caller Id No Info
by John807 - 04/02/25 06:19 PM
Forum Statistics
Forums84
Topics94,512
Posts639,934
Members49,844
Most Online5,661
May 23rd, 2018
Newest Members
yeloshak, ty3995, Sippy, sersmith, Taddeo
49,844 Registered Users
Top Posters(30 Days)
Toner 8
Taddeo 5
dexman 3
DeanB 2
Who's Online Now
1 members (Yoda), 497 guests, and 36 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0