destination code ?'s

Print Thread

Rate Thread

destination code ?'s #122098 10/11/04 11:02 AM
Joined: May 2004 Posts: 335 Simi Valley, CA, U.S.A. Jack Damage Member
Jack Damage Member Joined: May 2004 Posts: 335 Simi Valley, CA, U.S.A.	Setting up a Pri system here at the office, so I'm not spinning my wheels on site (after hours job). Anyway, the line pool access code "9" is cleared in system programming, but I can't use 9 as a destination code for the routing, not even as a leading digit. I've used "99" before when this has happened, but I can't even do that. Any clues as to what else is tying up "9"? Punch down all your damn pairs!..........(please).

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: destination code ?'s #122099 10/11/04 11:38 AM
Joined: Aug 2003 Posts: 5,155 Likes: 5 Gainesville, FL, USA nfcphoneman Moderator-Vertical, Vodavi
nfcphoneman Moderator-Vertical, Vodavi Joined: Aug 2003 Posts: 5,155 Likes: 5 Gainesville, FL, USA	What is your DN range? Could it be that your B2 DN's are in the 9xxx range? Gainesville Telephone Systems Jacksonville Telephone Systems

Re: destination code ?'s #122100 10/11/04 12:38 PM
Joined: May 2004 Posts: 335 Simi Valley, CA, U.S.A. Jack Damage Member
Jack Damage Member Joined: May 2004 Posts: 335 Simi Valley, CA, U.S.A.	Mostly 400's, there are some 200's (a few). I checked the B-2's up to port 816 and none started with 9. Punch down all your damn pairs!..........(please).

Re: destination code ?'s #122101 10/12/04 03:49 AM
Joined: Apr 2002 Posts: 305 .NJ,USA. samh Member
samh Member Joined: Apr 2002 Posts: 305 .NJ,USA.	Check external code, by default is 9, clear that and maybe one of the received digits starts with 9 thatâ€™s also could be a conflict.

Re: destination code ?'s #122102 10/12/04 05:19 AM
Joined: May 2003 Posts: 50 Houston,Tx Davee Member
Davee Member Joined: May 2003 Posts: 50 Houston,Tx	check the following: Call Park Prefix External Access Code DID numbers Line pool codes Internal set numbers Disa DNs Auto DNs Good luck

Re: destination code ?'s #122103 10/13/04 08:20 AM
Joined: May 2004 Posts: 335 Simi Valley, CA, U.S.A. Jack Damage Member
Jack Damage Member Joined: May 2004 Posts: 335 Simi Valley, CA, U.S.A.	I'm a bone head. Their main line is 9911 and they have one that starts with 8. Looks like only single digit to dial out with for PRI-A will be 5. Anyone know if there is a way to put the destination code on a button like a Pool button (F64-9)? Punch down all your damn pairs!..........(please).

Moderated by MooreTel

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems destination code ?'s