atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Norstar MICS XC6.1 S/W with BUGS

Rumor has it XC6.1 is in the field with bugs and an upissue XC6.1 wi6.10 has been released to clear it. I am looking for the official Software Release Note to get my supplier to make the swap. Anyone seen such a document?

its been posted before, here you go.

-------------------------
ITAS SRN – 026 NA
August, 2004

Norstar MICS 6.1 MR wi 6.10 and CICS 6.1 MR wi 6.10 were released to the installed base in August
2004 as a maintenance release. SRN 02x replaces SRN 024 (MICS/CICS 6.1 MR wi6.05). This new release incorporates several fixes to the core software. A replacement process is in place and described below.
This SRN is valid for one (1) year from date of issue above.


Issues resolved in MICS 6.1 MR wi 6.10
A frozen set display and subsequent failure of parking calls (F74) and retrieving parked calls can occur when picking up the handset during dialling of a number starting with the Park Prefix.
A scenario where T1 E&M channels were locking up.
A supervisor silent monitoring a hunt group call performs ‘join’, ‘leave’ and then ‘exit’ functions but remains connected to the call.
Callers transferring through CAA (Centralized Auto Attendant) on NVM to the remote site get ‘dead air’ or an incorrect mailbox.
PRI calls tandeming through the KSU via the ‘Auto’ DN’ or ‘DISA’ DN do not get completed when the caller paused during the dialling of the outgoing call.


Issues resolved in CICS 6.1 MR wi 6.10
A frozen set display and subsequent failure of parking calls (F74) and retrieving parked calls can occur when picking up the handset during dialling of a number starting with the Park Prefix.
A supervisor silent monitoring a hunt group call performs ‘join’, ‘leave’ and then ‘exit’ functions but remains connected to the call.
Callers transferring through CAA (Centralized Auto Attendant) on NVM to the remote site get ‘dead air’ or an incorrect mailbox.

The ordering codes for the software upgrades are as follows:
Description CPC Code Engineering Code
CDA - MICS XC 6.1 MR wi6.10 cartridge only N0014646 NT7B66DQ USA - MICS XC 6.1 MR wi6.10 cartridge only N0014647 NT7B66DR NA - MICS 6.1 MR wi6.10 cartridge only N0014648 NT7B66DT CICS - RP 6.1 MR wi6.10 cartridge only N0014649 NT7B66DU CICS - RIP 6.1 MR wi6.10 cartridge only N0014650 NT7B66DV CICS - SP 6.1 MR wi6.10 cartridge only N0014651 NT7B66DW CICS - SIP 6.1 MR wi6.10 cartridge only N0014652 NT7B66DX