|
|
|
|
Joined: Nov 2004
Posts: 9
Member
|
OP
Member
Joined: Nov 2004
Posts: 9 |
I have an old MICS R1T1 and I got a new 6.1 SW with NVRAM , can I just power off replace the NVRAM and power on? I am not worried about losing programming because I want to reprogram from scratch.
Any thing I should take care of before doing so?
|
|
|
|
|
Joined: Feb 2004
Posts: 454
Member
|
|
Member
Joined: Feb 2004
Posts: 454 |
if you aren't worried about the programming then get started.
you'll enjoy programming with the new 6.1 anyways. goes much smoother and easier to find what you want to program.
|
|
|
|
|
Joined: Nov 2004
Posts: 222
Member
|
|
Member
Joined: Nov 2004
Posts: 222 |
How new is your 6.1? Because if it is not the lastest then there were issues with the software. The latest issue is 6.1 MR6.10.
|
|
|
|
|
Joined: Nov 2004
Posts: 9
Member
|
|
OP
Member
Joined: Nov 2004
Posts: 9 |
Thanks for the replies, I am aware of the issues with 6.1
|
|
|
|
Forums84
Topics93,883
Posts637,025
Members49,675
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
93
guests, and
15
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
