|
|
|
|
Joined: Dec 2004
Posts: 38
Member
|
|
Member
Joined: Dec 2004
Posts: 38 |
I have added 2 PRI cards to a system that already had one installed. The second PRI came up fine however the 3rd has all lights blinking and does not seem to be registering at all. Are there any special rules for this 3rd PRI.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2002
Posts: 157
Member
|
|
Member
Joined: Apr 2002
Posts: 157 |
I believe you need 2nd combo card and it has to go in TM 8 with no other cards in the TM. Also must be correct software 6.1XC
B.
|
|
|
|
|
Joined: Dec 2004
Posts: 38
Member
|
|
Member
Joined: Dec 2004
Posts: 38 |
That's right. Also found out that the PRI card has to be a revision ending with AAAA.
|
|
|
|
|
Joined: May 2004
Posts: 335
Member
|
|
Member
Joined: May 2004
Posts: 335 |
Our vendors recommend that they are all the same "AAAA" cards, but for certain the 3rd one needs to be "AAAA".
Also, you better make sure the Software is XC 6.1 MR. I had 2 big accounts, both with 3 t-1's (1 of them is a PRI) and they had issues with channels locking up and system resetting spontaneously. The "MR" version is a "maintenance release" that fixed a few bugs in the regular XC 6.1 version. We will only install MR software on T-1 jobs now as a result.
Punch down all your damn pairs!..........(please).
|
|
|
|
Forums84
Topics94,572
Posts640,224
Members49,874
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
70
guests, and
150
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
