|
|
Joined: Apr 2003
Posts: 7
Member
|
OP
Member
Joined: Apr 2003
Posts: 7 |
I installed a older norstar 616 with DR4. I need to know how to get the Aux. ringer to work and what pin are used on the block. I am not sure how to setup in the programming for the external ringer.
Thankks
Rich . . .
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jan 2005
Posts: 826
Member
|
|
Member
Joined: Jan 2005
Posts: 826 |
Hi Rich, The Aux ringer contacts are on the Violet-Brown pair of the station block. As for the programming, you can specify aux ringer 'YES' or 'NO' on a set-by-set or line-by-line basis. Then when a device (line or set)with aux ringer set to 'YES' rings, the contacts will close. ------------------ BCM Guy www.BCMguy.com Learn more about the Nortel Networks Business Communications Manager HERE !
|
|
|
|
|
Joined: Apr 2003
Posts: 7
Member
|
|
OP
Member
Joined: Apr 2003
Posts: 7 |
<font face="Verdana, Arial" size="2">Originally posted by BCMguy.com:
Hi Rich,
The Aux ringer contacts are on the Violet-Brown pair of the station block. As for the programming, you can specify aux ringer 'YES' or 'NO' on a set-by-set or line-by-line basis. Then when a device (line or set)with aux ringer set to 'YES' rings, the contacts will close.
</font>
|
|
|
|
|
Joined: Apr 2003
Posts: 7
Member
|
|
OP
Member
Joined: Apr 2003
Posts: 7 |
<font face="Verdana, Arial" size="2">Originally posted by BCMguy.com:
Hi Rich,
The Aux ringer contacts are on the Violet-Brown pair of the station block. As for the programming, you can specify aux ringer 'YES' or 'NO' on a set-by-set or line-by-line basis. Then when a device (line or set)with aux ringer set to 'YES' rings, the contacts will close.
Does that povide power at the pair?
I have a Viking 600D unit that need ringer voltage to work. What I want to do is have ringer over the Paging system.
Thanks
Rich . . .
</font>
|
|
|
|
|
Joined: Jan 2005
Posts: 826
Member
|
|
Member
Joined: Jan 2005
Posts: 826 |
No power...just a contact closure. If you have an application that requires more current than you would like to run through the KSU, I usually use a relay to safely switch the load. ------------------ BCM Guy www.BCMguy.com Learn more about the Nortel Networks Business Communications Manager HERE !
|
|
|
|
|
Joined: Jan 2005
Posts: 826
Member
|
|
Member
Joined: Jan 2005
Posts: 826 |
Regarding the 600D specifically, it is made to accept normal ring voltage from an analog station port or CO line. The best way to use this with the Norstar is to connect an ATA. A similar device that would fit your application is the NR-100 from Bogen. It will operate on ring voltage or a contact closure (perfect for the Aux Ringer port).
|
|
|
|
Forums84
Topics94,291
Posts638,809
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
126
guests, and
391
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
