|
|
Joined: May 2005
Posts: 137
Member
|
OP
Member
Joined: May 2005
Posts: 137 |
I have just upgraded my NAM from version 2.0 of the software to version 4.1. After the tech completed the upgrade my 4 port system now became a 2 port system.
The NAM is just a 486 computer with 32MB ram running OS/2. I believe the Keycodes to turn on the 4 ports are just a file called SEKUR on the hard drive. I also believe that the tech that did the install did not do the upgrade properly.
Luckily I cloned the hard drive prior to the tech's install. Can I just copy the SEKUR file from the old drive onto the new drive and get all 4 ports back?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
You should be able to, but I have never done it that way.
There should be a file from the original install with the key codes on it. If you re-enter the codes it will make it a 4 port unit again.
I would call back the company that did upgrade and make them fix it correctly!
Good Luck!!
If all else fails, use a BFH.
|
|
|
|
|
Joined: May 2005
Posts: 137
Member
|
|
OP
Member
Joined: May 2005
Posts: 137 |
If they want the last 50% of their contract they better fix it.
|
|
|
|
Forums84
Topics93,959
Posts637,375
Members49,702
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
122
guests, and
36
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
