|
|
|
|
Joined: Jun 2005
Posts: 1
Member
|
|
Member
Joined: Jun 2005
Posts: 1 |
I am working on a customer's Call Pilot 100 and the darned thing never starts up. I connected through the serial port and watched the progress of the boot-up. After some time, it starts displaying the following message:
"VF_EXTIN: Illegal extent in indirect block, fn1=7, path1=/access2/SEKUR,bn=84195"
It repeats this over and over again with incrementing numbers on the left side. They did have a power issue (the unit was on a battery backup) and hasn't worked right since. Am I dealing with someting that can be fixed? Does the whole unit need replaced because of a messed up memory card?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Mar 2005
Posts: 6
Member
|
|
Member
Joined: Mar 2005
Posts: 6 |
SEKUR refers to keycodes I believe - almost sounds like the keycodes got corrupted. I've run into that on BCM a couple times, but haven't worked on a CP100 before.
Maybe remove and reapply the keycode files? Might need Nortel support to do that.
|
|
|
|
|
Joined: Jun 2005
Posts: 12
Member
|
|
Member
Joined: Jun 2005
Posts: 12 |
Nortel has a problem with the power plugs. Change the power plug with the transformer. (Radio Shack makes compatible transformers) This will probably fix your problem
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
327
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
