|
|
Joined: Nov 2005
Posts: 86
Member
|
Member
Joined: Nov 2005
Posts: 86 |
i am installing a TAPIT call accounting system. Not sure of the settings the pc is asking for. i have tried parity on/off and changing the bits from 1200 to 9600 but no luck. help
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
Member
Joined: Mar 2001
Posts: 3,869 |
They give you free one year service now.
Is this a used unit?
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
Joined: Nov 2005
Posts: 86
Member
|
Member
Joined: Nov 2005
Posts: 86 |
the tapit is new. i am not sure of the settings on the smdr. the tapit tech support does not know them. the smdr is a used one, so no manual.
|
|
|
|
Joined: Apr 2002
Posts: 305
Member
|
Member
Joined: Apr 2002
Posts: 305 |
The parameters of SMDR4 are: • 2400 (Minimum)baud rate (You can change it up to 19200) • None parity • 8 data bit • 1 stop bit • hardware flow control (CTS/RTS)
the SMDR must be connected to a PC through the RS232 interface.You can admin the SMDR using feature 9*2. I hope that helps
|
|
|
|
Joined: Nov 2005
Posts: 86
Member
|
Member
Joined: Nov 2005
Posts: 86 |
feat 9*2 is admined where?? nortel or pc or tapit?? thanks for the info on the parameters that helps. all i was getting before was diamonds and little hearts... will try this out on tuesday.
|
|
|
|
Joined: Apr 2002
Posts: 305
Member
|
Member
Joined: Apr 2002
Posts: 305 |
Feature 9*2 is (admin feature) from the nortel side on the adminstartion phone.
|
|
|
|
Joined: Nov 2005
Posts: 86
Member
|
Member
Joined: Nov 2005
Posts: 86 |
got it. did the feat 9*2 and got it going. thanks.
|
|
|
Forums84
Topics94,513
Posts639,939
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
123
guests, and
46
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|