|
|
|
|
Joined: Nov 2008
Posts: 3
Member
|
|
Member
Joined: Nov 2008
Posts: 3 |
yup did that, still no go. It seems that the caller id issue follows the ports, if I swap line 2 and 3, ports 202 and 203, the line on port 203 shows the caller id while the line on port 202 loses its caller id info??? any ideas? I have swapped the M8 out with a second replacement now and still having the same issue. Is there an interface for this thing or a trick to setting it up because it seems straight forward.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Check the programing for line 2. Caller ID DN is none by default.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Nov 2008
Posts: 3
Member
|
|
Member
Joined: Nov 2008
Posts: 3 |
ok, the caller id DN for line 2 and 4 are set to the CAP; the prime set for each line is set to the voicegate vip4000 DN. This is the same as the other 6 lines that are all working fine.
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Check your wiring, that's the only thing left.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Forums84
Topics94,552
Posts640,109
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (BobRobert, justbill),
122
guests, and
211
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
