|
|
|
|
Joined: Dec 2003
Posts: 31
Member
|
|
Member
Joined: Dec 2003
Posts: 31 |
Has anyone out there ever networked two MICS over customer owned fiber? I have an instance where the customer has two MICS in two different locations.The customer is going to pull fiber to the two locations for their internet access, and they want to keep both MICS and add a NAM or Callpilot for voice mail
Doing the right thing is not always easy....but doing the right thing is always the right thing to do!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2001
Posts: 1,390
Member
|
|
Member
Joined: Apr 2001
Posts: 1,390 |
Just upgrade one of the mics and used some fiber extenders to put 0x16 into one of the other locations. It will be unified at that point, rather than messing around with trunking connectivity between two mics.
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
Rusty, is there some special adapter that can plug into the Fiber mods to extend fiber? Also, I thought the fiber modes were single mode, is that correct?
|
|
|
|
|
Joined: Jul 2005
Posts: 1,184
Member
|
|
Member
Joined: Jul 2005
Posts: 1,184 |
What kind of distance between the two locations? I have seen installs where they use fiber adapter cords to remote a 0x16 station module without any powered extenders. There are companies that make custom Nortel link cords with various end configurations just for this. There are extenders available as well. Here is one: https://www.ccpin.com/pdf/Normer/Module%20Extender.pdf
|
|
|
|
|
Joined: Apr 2001
Posts: 1,390
Member
|
|
Member
Joined: Apr 2001
Posts: 1,390 |
Zman,
You're correct. I read the spec wrong on the mck option, which is only a DATA solution. However, doesent it seem reasonable that there should be some kind of adapter that would allow for the the extension of the fiber mods?
|
|
|
|
|
Joined: Apr 2001
Posts: 1,390
Member
|
|
Member
Joined: Apr 2001
Posts: 1,390 |
twisted, thats what i was thinking about.
|
|
|
|
|
Joined: Dec 2003
Posts: 31
Member
|
|
Member
Joined: Dec 2003
Posts: 31 |
Thanks for the info, I believe that MCK still does provide the local and remote extenders,and we are going to upgrade to 7.0 xc in one of the Mics.
Doing the right thing is not always easy....but doing the right thing is always the right thing to do!
|
|
|
|
Forums84
Topics94,522
Posts639,999
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
290
guests, and
38
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
