web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#128194 05/04/06 12:28 AM
Joined: Apr 2002
Posts: 1,101
JJ
Offline
Member
Member
Joined: Apr 2002
Posts: 1,101
Got call from 2nd party vendor to go install flash2 and program system.

No problem there.

They had a Fast RAD, that when I tried to program said inactiv feature. Never seen this before, so thought I would ask. MICS with Software 4.1XC.

Any ideas?

Thanks,
JJ


If all else fails, use a BFH.
Nortel Phone System Service
VoIP Demo

Nortel Phone System Service in Canada


Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

#128195 05/04/06 02:41 AM
Joined: Oct 2003
Posts: 694
Member
Member
Joined: Oct 2003
Posts: 694
Try the Microsoft approach, power it off and on and then see if it sync's up. Did you verify that it is hooked to an extention from the mics? Someone may have taken it'e extention in a move or something. Good luck

emmitt2727


Shawn
Connect Telecom www.connecttelecom.us
In matters of style, swim with the current. In matters of principle, stand like a rock. Thomas Jefferson
#128196 05/04/06 03:23 AM
Joined: Jul 2005
Posts: 1,184
Member
Member
Offline
Joined: Jul 2005
Posts: 1,184
One interconnect company that I know of that does MACS for a large company in my area uses a Viking unit. They have it answer the line (set higher than the Fast RAD ring number) and through touch tones, they can do a power reset on the Fast RAD. It is a common problem with Fast RAD's and this way they don't have to call the customer to reset the power.

#128197 05/04/06 11:31 AM
Joined: Apr 2002
Posts: 1,101
JJ
Offline
Member
Member
Joined: Apr 2002
Posts: 1,101
It looks like it is the power supply on the Fast RAD. I will try another when I go back.

Thanks,
JJ


If all else fails, use a BFH.
#128198 05/04/06 03:02 PM
Joined: Jul 2005
Posts: 1,184
Member
Member
Offline
Joined: Jul 2005
Posts: 1,184
If I remember right, there is a power LED on the Fast RAD.


Moderated by  MooreTel 

Link Copied to Clipboard
Newest Topics
Change desi-less label from a phone
by Yoda - 02/26/25 06:26 PM
SBX IP320
by johnp - 02/18/25 03:02 PM
SMT-i5210 SOFTWARE
by NateBates - 02/14/25 02:47 PM
Bogen amp keeps tripping reset
by Yoda - 02/12/25 12:40 PM
Forum Statistics
Forums84
Topics94,490
Posts639,856
Members49,833
Most Online5,661
May 23rd, 2018
Newest Members
hayl, kosia, LJetronic, CLKAHCK, B. Vignesh
49,833 Registered Users
Top Posters(30 Days)
dexman 11
Toner 9
Yoda 5
pvj 5
johnp 4
Who's Online Now
1 members (hbiss), 668 guests, and 180 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0