|
|
|
|
Joined: May 2006
Posts: 6
Member
|
|
Member
Joined: May 2006
Posts: 6 |
Greets all,
I'm going to be upgrading our MICS 3.0 system to 6.1MR this weekend, and wanted to make sure I had all of my bases covered.
It's a non expanded system, very basic, 4 analog CO lines and 20 extensions. Voicemail is Startalk FLASH 2 running V2.0.10. Only other hardware is a FastRAD (that I'm using with NRU 10).
I'll be cold starting it with the upgrade, so I'm not worried about saving our settings.
From what I can tell, the VM software version is compatible with 6.1MR, and the FastRAD will work (but I may need an additional map file from somewhere?)
I've heard mention of line numbering changing when I upgrade? Will I have to move some stuff around on my BIX, or will all the ports stay the same (ie. same ICS wiring chart for 3.0 and 6.1MR)?
Also, if I should need to roll back to 3.0 for any reason, I've heard there's a trick or two?
Thanks in advance,
Ken.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: May 2004
Posts: 335
Member
|
|
Member
Joined: May 2004
Posts: 335 |
Startalk FLASH 2.0 on a MICS 6.1 is a go according to my compat chart
Punch down all your damn pairs!..........(please).
|
|
|
|
|
Joined: May 2006
Posts: 6
Member
|
|
Member
Joined: May 2006
Posts: 6 |
Thanks Jack, I just saw your post in the other thread.
|
|
|
|
Forums84
Topics94,514
Posts639,943
Members49,846
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
128
guests, and
31
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
