|
|
|
|
Joined: Jul 2006
Posts: 4
Member
|
|
Member
Joined: Jul 2006
Posts: 4 |
I have a 3x8 DR5.1
Everything is working except the ATA2.
I'm trying to connect a wireless phone or fax to the ATA2. It powers up and I'm getting a dial tone, but can't dial out.
I read the other post, set the line access code in the config to 9, but it doesn't work.
Does anyone have any ideals?
Thanks
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Put your lines in line poolA and set a pool code.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Jul 2006
Posts: 4
Member
|
|
Member
Joined: Jul 2006
Posts: 4 |
Sweet it worked, but can I select which line it uses on the 3x8?
Thanks
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
you would have put each line in it's own pool and give each pool a unique access code. Also be sure the DN has access to all the pools
Cheers
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Forums84
Topics94,553
Posts640,115
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
31
guests, and
63
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
