|
|
|
|
Joined: Sep 2006
Posts: 6
Member
|
|
Member
Joined: Sep 2006
Posts: 6 |
Need to move a Norstar MICS system with a T-1.
The system has a DTI card NT7B74GA-93.
The T-1 service will also be moved by the service provider to the new location and its supposed to be identical T-1 service.
The release shows SP: 30CQE06 NAT
Believe this is a MICS Rel 6.1.
Plan on moving the ICS with a UPS battery backup so as not to power down the unit. Does anyone see any forseeable problems that may be encountered with the T-1 service. Please be specific.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2001
Posts: 1,390
Member
|
|
Member
Joined: Apr 2001
Posts: 1,390 |
Make a backup of the systems, AND dont try to move the system HOT.
~r
|
|
|
|
|
Joined: Feb 2006
Posts: 598
Member
|
|
Member
Joined: Feb 2006
Posts: 598 |
Make sure the T1 is there and working, even if it takes bringing down another system to test.
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
You should not have any problem with the T1 when you move it. Of course Murphy's Law always over-rides that statement. DO NOT - I repeat - DO NOT MOVE THE SYSTEM while connected to a UPS. The only problems that you can't prepare for is:
1) The CAP (which saves programming) might be bad and you would lose all programming.
2) The T1 does not come up because the provider didn't do everything for the T1 at the new location.
Other than those two issues, you should not have any problems.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Sep 2006
Posts: 6
Member
|
|
Member
Joined: Sep 2006
Posts: 6 |
OK, won't move the system hot, therefore I would like to back up the programming before I power it down.
I believe I need to purchase Norstar Remote Utilities Release 11.0 to perform a system backup? Any thing else required to do a backup?
|
|
|
|
|
Joined: Aug 2002
Posts: 1,088 Likes: 2
Member
|
|
Member
Joined: Aug 2002
Posts: 1,088 Likes: 2 |
|
|
|
|
Forums84
Topics94,552
Posts640,111
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
60
guests, and
97
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
