|
|
|
|
Joined: Jan 2007
Posts: 46
Member
|
|
Member
Joined: Jan 2007
Posts: 46 |
The existing Norstar has 2 T-1s. One is a PRI, the other is not. Can I add a 3rd T-1 (2nd PRI)without upgrading to a MICS 7.0?
thanks.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Feb 2006
Posts: 598
Member
|
|
Member
Joined: Feb 2006
Posts: 598 |
As far as I know, on any MIC's you can only have 2 T1's as they have to be located in the core cabinet.
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
|
|
Joined: Jan 2007
Posts: 1,026
Member
|
|
Member
Joined: Jan 2007
Posts: 1,026 |
My information states that you can add a 3rd T1 to a MICS 6.1. Just not sure if you need another PRI enabler code.
|
|
|
|
|
Joined: Nov 2004
Posts: 222
Member
|
|
Member
Joined: Nov 2004
Posts: 222 |
Yes the PRI code is for the whole system.
|
|
|
|
|
Joined: Jan 2007
Posts: 46
Member
|
|
Member
Joined: Jan 2007
Posts: 46 |
Does the 3rd T-1 (PRI) go into the 1st slot of the 1st Trunk Module?
|
|
|
|
|
Joined: Feb 2006
Posts: 598
Member
|
|
Member
Joined: Feb 2006
Posts: 598 |
Maybe next time I should look at the cd before speaking. The manual does show the 3nd PRI in slot 1 of the TM.
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
|
|
Joined: Jan 2007
Posts: 46
Member
|
|
Member
Joined: Jan 2007
Posts: 46 |
What if the original PRI Enabler codes are not written down anywhere? 
|
|
|
|
|
Joined: Jan 2005
Posts: 826
Member
|
|
Member
Joined: Jan 2005
Posts: 826 |
The code doesn't need to be entered again when adding another PRI. It just needs to be entered once, to unlock the PRI parameters in software.
I hope that helps!
|
|
|
|
|
Joined: Jan 2007
Posts: 46
Member
|
|
Member
Joined: Jan 2007
Posts: 46 |
|
|
|
|
|
Joined: Nov 2004
Posts: 222
Member
|
|
Member
Joined: Nov 2004
Posts: 222 |
But if at all possible I would see if I could find the codes. This way if you ever or for some reason the system ever defaults you will have them.
|
|
|
|
Forums84
Topics94,532
Posts640,045
Members49,854
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
285
guests, and
34
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
