|
|
|
|
Joined: Feb 2007
Posts: 17
Member
|
|
Member
Joined: Feb 2007
Posts: 17 |
setting up a BCM50e with IP phones, everything works great internally, can't access remotely ( but can access the router ) where are the settings for the WAN on the BCM , manuals direct me to the router settings, can't find them, HELP!
HELP!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Mar 2005
Posts: 245
Member
|
|
Member
Joined: Mar 2005
Posts: 245 |
You should be able to find them under Configuration, System, IP Subsystem
NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0
MITEL 5000 3300 NuPoint
"If I had known it would turn out like this, I would have become a locksmith"
Albert Einstein
|
|
|
|
|
Joined: Feb 2007
Posts: 17
Member
|
|
Member
Joined: Feb 2007
Posts: 17 |
thanks,
i thought that IP Subsystem pertains to the internal LAN, please advise
|
|
|
|
|
Joined: Mar 2005
Posts: 245
Member
|
|
Member
Joined: Mar 2005
Posts: 245 |
I'm thinking that the router tab is under there, though I'm posting this from memory.
I'll get into one of my lab systems tomorrow AM and find it.
NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0
MITEL 5000 3300 NuPoint
"If I had known it would turn out like this, I would have become a locksmith"
Albert Einstein
|
|
|
|
|
Joined: Mar 2005
Posts: 245
Member
|
|
Member
Joined: Mar 2005
Posts: 245 |
I'm thinking that the router tab is under there, though I'm posting this from memory.
I'll get into one of my lab systems tomorrow AM and find it.
NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0
MITEL 5000 3300 NuPoint
"If I had known it would turn out like this, I would have become a locksmith"
Albert Einstein
|
|
|
|
|
Joined: Mar 2005
Posts: 245
Member
|
|
Member
Joined: Mar 2005
Posts: 245 |
NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0
MITEL 5000 3300 NuPoint
"If I had known it would turn out like this, I would have become a locksmith"
Albert Einstein
|
|
|
|
|
Joined: Feb 2007
Posts: 17
Member
|
|
Member
Joined: Feb 2007
Posts: 17 |
thanks , i will wait to hear from you
|
|
|
|
|
Joined: Feb 2007
Posts: 17
Member
|
|
Member
Joined: Feb 2007
Posts: 17 |
also , this is on a 2.0 ( BCM50e )
FYI
|
|
|
|
|
Joined: Feb 2007
Posts: 17
Member
|
|
Member
Joined: Feb 2007
Posts: 17 |
Anybody !!!!!!!!!!!!!!!!!!
|
|
|
|
|
Joined: Jan 2005
Posts: 826
Member
|
|
Member
Joined: Jan 2005
Posts: 826 |
The "router" IS the WAN on the BCM. If you can see that, you already have access to what you need.
My guess is that you're not using an appropriate access method to communicate with the BCM. The correct method is a simple RAS connection (use Windows Dial-up Networking). Check your RAS IP address. It should be on the 10.10.14.0 subnet by default. Then, access the system in the normal fashion (using the unit's address on the RAS network).
Good Luck!
|
|
|
|
Forums84
Topics94,526
Posts640,015
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
295
guests, and
55
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
