|
|
|
|
Joined: Jan 2006
Posts: 351
Member
|
|
Member
Joined: Jan 2006
Posts: 351 |
Hello again Ladies and Gentlemen,
I'm here to give you a laugh with my awe-inspiring powers of reasoning and deduction.
Try to stay off of the floor, the cleaning crew might be lazy.
My boss put a DTI card into a MICS 6.0 a few weeks ago and can't figure out why he can dial out but not into the did numbers.
He even completely defaulted and reprogrammed the system TWICE, but we're still getting this.
I have no idea where to look for the disa dn, as I think this is why the system is answering with dt. Everything I've read so far says it probably is. The manual is pretty sketchy on details pertaining to disa dn as well.
I can make calls out on this all day if I want. I actually replaced the card yesterday just to rule it out.
I checked line programming on targets 145 through 272 yesterday (because I had absolutely nothing better to do with my time) but found nothing standing out.
Can anyone offer any tips on where to start looking?
Thanks so much,
Tyler
If you can read this, you're in range.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2005
Posts: 56
Member
|
|
Member
Joined: Aug 2005
Posts: 56 |
Make sure the PRI lines are set to AUTO ANSWER rather than MANUAL. Just one place to check.
If I only had more time to golf!
|
|
|
|
|
Joined: Aug 2002
Posts: 1,088 Likes: 2
Member
|
|
Member
Joined: Aug 2002
Posts: 1,088 Likes: 2 |
you can find disa dn under system programming and then in access codes.
|
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
tylerpd1:
If I am reading your post correctly, I think you are saying, the wonderful boss somehow turned on Answer DISA and you are trying to find where to turn it off - right???
Look under LINES - SHOW LINE: - TRUNK LINE/DATA. You should find Answer Mode & Answer with DISA Y/N.
If I am reading you wrong, just ignore this post.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
Forums84
Topics94,516
Posts639,970
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
135
guests, and
34
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
