|
|
|
|
Joined: Jun 2004
Posts: 100
Member
|
|
Member
Joined: Jun 2004
Posts: 100 |
What is the most painless way to upgrade this? I'm adding a second 6 port expander in the KSU and am assuming when I install the software and power up I will have lost all the programming. There are about 80 digital phones, PRI, and a CP150 with Call Center and more on this sytem. Reprogramming manually the only option? Say it aint so.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jun 2004
Posts: 100
Member
|
|
Member
Joined: Jun 2004
Posts: 100 |
That post helps; somewhat incomplete because I will be going from 6.1 (standard) to 7.1 XC and not 7.0 XC like in the posts. Maybe the same pattern still. Another tech told me that as long as I do not add any hardware but just upgrade the software first I 'should' not lose any programming. Thanks - any other replies much appreciatted.
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Should be no issue. But as always in any software upgrade back up fisrt in case you have to go back Have your PRI keycode handy and always upgrade software BEFORE adding hardware.
Welcome back Marty.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Jun 2004
Posts: 100
Member
|
|
Member
Joined: Jun 2004
Posts: 100 |
Thanks - can I retrieve the PRI keycodes in programming?
|
|
|
|
Forums84
Topics94,516
Posts639,968
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
