|
Joined: Nov 2003
Posts: 1,310
Member
|
OP
Member
Joined: Nov 2003
Posts: 1,310 |
I have a client with an MICS that intermittently loses half its' phones. When you push in on the station amphenol, the phones come back up. All the clamps are in place.
Does this sound like a problem with the tails or with the board?
D. Ocean Miami, FL
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Apr 2001
Posts: 1,390
Member
|
Member
Joined: Apr 2001
Posts: 1,390 |
If its constantly losing the same phone(s) i would suspect that its the mics. Sounds like the soldering between the pcp and the amphenol connector has popped. But your guess is as good as any in a situation like this.
|
|
|
|
Joined: Jun 2007
Posts: 58
Member
|
Member
Joined: Jun 2007
Posts: 58 |
Some amphenols have low profile hoods that may be coming loose. Try putting some padding between the clamp and the amphenol.
Brian Cox J & J Communications
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Amphenols come with a screw at the top. You should ALWAYS remove that screw. It may be preventing the cable from fully seating itself.
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Originally posted by NTlayoff: Amphenols come with a screw at the top. You should ALWAYS remove that screw. It may be preventing the cable from fully seating itself. Took the words right out of my mouth.
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Mar 2001
Posts: 3,268
Moderator-Allworx, Nisuko-Tie, Vodavi
|
Moderator-Allworx, Nisuko-Tie, Vodavi
Joined: Mar 2001
Posts: 3,268 |
Sometimes, well meaning techs or maint men start screwing that top screw in...what happens is that the top half comes out a bit--or the amphenol just becomes loose.
Had one like that just last week.
CICS had problems with static on a line--and phones out. took out the screws and tightened up the ampehenols---everything was peachy!!
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Originally posted by JWRacedog: Sometimes, well meaning techs or maint men start screwing that top screw in...what happens is that the top half comes out a bit--or the amphenol just becomes loose. Fortunately, I had a customer who wanted to move his MICS system from another state to my town. Had someone remove the whole plywood with all the equipment still on it, then shipped it to me in my office. Whoever installed this system used hex head screws. But worse than that, he took apart the amphenol cables, un-did them as far as he had to, then put a screw in the amphenol bottom end and screwed both top AND bottom of each cable to the MICS. Then he tried putting it back together and ended up cutting out some of the plastic housing to get it back over the cable and made it look like nothing was wrong with it. Couldn't figure out why the stupid cable would not come off the MICS. Talk about stupid !!!!!! I say at the beginning,"Fortunately", because I would have been in big trouble trying to take that all apart if I was on a customer site.
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
|
Joined: Nov 2003
Posts: 1,310
Member
|
OP
Member
Joined: Nov 2003
Posts: 1,310 |
I always remove the screws. That is not the issue.
The amphenols are of the larger/thicker type.
This system has been in place for years and just started having this issue. I'm guessing, due to heating/cooling cycles, that a solder joint has broken/loosened somewhere, but thought I would post here for other opinions.
D. Ocean Miami, FL
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
162
guests, and
353
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|