|
|
Joined: Nov 2007
Posts: 50
Member
|
|
Member
Joined: Nov 2007
Posts: 50 |
what does Nortel call a DID on a MICS manual??? I have searched for DID programming and I can't find it on a MICS manual.ANy info would be greatly appreciated.
Best Regards
Chris Espinoza
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Nov 2007
Posts: 50
Member
|
|
Member
Joined: Nov 2007
Posts: 50 |
how do I swap DID's??? Customer has a ATA for a fax but the DID that is programmed in is not a working DID so I need to change it to a new DID and I can't find DID programming anywhere in the manual
Best Regards
Chris Espinoza
|
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
DID's are programmed as Target Lines! Access programming and check the line assignment for your ATA.
|
|
|
|
|
Joined: Nov 2007
Posts: 50
Member
|
|
Member
Joined: Nov 2007
Posts: 50 |
Best Regards
Chris Espinoza
|
|
|
|
|
Joined: Nov 2007
Posts: 50
Member
|
|
Member
Joined: Nov 2007
Posts: 50 |
ok, I didn't find anything with that...I checked the line assignment for my ATA ext but didn't see where to add the DID??????????????????
Best Regards
Chris Espinoza
|
|
|
|
|
Joined: Nov 2007
Posts: 50
Member
|
|
Member
Joined: Nov 2007
Posts: 50 |
could the ATA be bad???? everything is pointed to the right spots...
Best Regards
Chris Espinoza
|
|
|
|
|
Joined: Nov 2007
Posts: 50
Member
|
|
Member
Joined: Nov 2007
Posts: 50 |
ok, i tried to put a 7316E set on the port the ATA was on and none of the buttons are functional....any ideas if this has anything to do with my DID issue???
Best Regards
Chris Espinoza
|
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Originally posted by ChrisE:
ok, i tried to put a 7316E set on the port the ATA was on and none of the buttons are functional....any ideas if this has anything to do with my DID issue??? What do you mean by not functional?? Does the date/time show up in the display? or is the display blank? Did any of your diplay buttons flash when you plugged the phone in? Sounds like a wiring problem. or worst case bad port, but I would check your wiring.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Nov 2007
Posts: 50
Member
|
|
Member
Joined: Nov 2007
Posts: 50 |
the display worked and the phone lit up like they are suppose to but once it was done booting none of the buttons work, not even the numbers... And i know its not a wireing issue because I used my test star and connected it directly to the block...
Best Regards
Chris Espinoza
|
|
|
|
|
Joined: Nov 2007
Posts: 50
Member
|
|
Member
Joined: Nov 2007
Posts: 50 |
never mind it was a broken phone..I tried another one and it worked
Best Regards
Chris Espinoza
|
|
|
|
Forums84
Topics94,522
Posts639,999
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (John807, justbill),
137
guests, and
40
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
