|
|
|
|
Joined: Mar 2007
Posts: 6
Member
|
|
Member
Joined: Mar 2007
Posts: 6 |
Hi All,
What is the procedure to setup a usb flash drive on bcm 400, NT not being plug and play and all but I couldn't find anywhere to set it up. I also backed up bcm but only to the local drive, tried every which way to backup to my laptop but always received errors, I made sure the permissions on my laptop where wide open for that share etc, but it wouldn't go.
Also is there a way to transfer the backup off the local E: drive on the bcm to a usb flash drive
I don't have any manual for 3.6 so I was just reading one I found for 4.0 which is different
Any help would be appreciated, 15 yrs working on Nortel but not BCM
Rob
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
I'm certainly a novice with the BCM side of Norstar but I seem to remember someone saying that the flash had to be configured to Fat 32 or some such. That would account for errors writing to the flash.
I love Macs, J' deteste Le PC.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Dec 2005
Posts: 196
Member
|
|
Member
Joined: Dec 2005
Posts: 196 |
I don't think you can back up the BCM to the USB drive. Thats only works for rel.4.0 and BCM50. I have the the management manual. PM with email.
|
|
|
|
Forums84
Topics94,565
Posts640,180
Members49,869
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
21
guests, and
71
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
