Direct Trunk select on an Option 11C|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Direct Trunk select on an Option 11C #137417 02/21/08 05:40 AM
Joined: Nov 2006 Posts: 179 Estherville, IA jp1525 OP Member
OP jp1525 Member Joined: Nov 2006 Posts: 179 Estherville, IA	Can someone tell me how to program a direct trunk select key on an M2317? This will be ued to provide access to a Bogen paging system. Is there any programming in the trunks pgming as well? Thanks

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: Direct Trunk select on an Option 11C #137418 02/21/08 06:00 AM
Joined: Aug 2004 Posts: 9,159 Likes: 16 SOUTH TEXAS RATHER BE FISHING Admin
RATHER BE FISHING Admin Joined: Aug 2004 Posts: 9,159 Likes: 16 SOUTH TEXAS	Program the trunk as a PVR and assign it to the desired button. There is quite a bit of programming involved depending on the paging application. You could also set the paging up as a WATT or PAG trunk and assign the ACOD as an auto dial button.

Re: Direct Trunk select on an Option 11C #137419 02/21/08 06:09 AM
Joined: Nov 2006 Posts: 179 Estherville, IA jp1525 OP Member
OP jp1525 Member Joined: Nov 2006 Posts: 179 Estherville, IA	The trunk will be supplied talk battery from the Bogen. So all I need the trunk to be is a plain loop start trunk with an appearance on one phone.

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Direct Trunk select on an Option 11C