|
|
Joined: Feb 2007
Posts: 14
Member
|
OP
Member
Joined: Feb 2007
Posts: 14 |
Having trouble getting inbound calls to forward to cell#s, and cannot get outbound xfer to work get a routing resources not avil. message. I have PRI and pool code is 9. ext.s are set to allow redirect and have acces to line pool PRI A. On the CP150 in mbox admin outbound option is pool I can only give 1,2,ect. i'm assuming my PRIA is pool 1 I have tried
1 and 9. I've got MICS midi w 7.1 sw and CP150 R3.1
w/PRI access code 9 .Also line redirection will not work maybe all this is the same issue.
Any insight would be great THANKS. jrTN
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Feb 2005
Posts: 12,344 Likes: 3
Member
|
|
Member
Joined: Feb 2005
Posts: 12,344 Likes: 3 |
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Jun 2006
Posts: 8,732 Likes: 2
Moderator-Nortel, Computers, General
|
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,732 Likes: 2 |
If you hit the "SEARCH" link above for "External Transfer" within the Nortel forum, you will find the answer.  to the Nortel forum!
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
You must switch from using Pool codes to route and destination codes.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
In Voice mail set up number of channels to 2 instead of 1 by default then you will have Resources available for outbound transfer.
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, Yoda),
144
guests, and
344
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
