|
|
|
|
Joined: Mar 2005
Posts: 245
Member
|
|
Member
Joined: Mar 2005
Posts: 245 |
I have a Norstar VoIP Gateway attached to a MICS 7.0 that communicates with a few BCMs. MCDN is not in play in this setup.
Calling across the network between the BCMs gives immediate ring tone on the callers end. Calling through the Gateway either to the MICS or from the MICS results in a 6 to 8 second delay before the callers hear the ring tone. I have tweaked settings in the Gateway with no effect.
Any ideas?
NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0
MITEL 5000 3300 NuPoint
"If I had known it would turn out like this, I would have become a locksmith"
Albert Einstein
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Plug a computer into the network where the MICS and ping where the BCM is. This may be where the delay lies.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Mar 2005
Posts: 245
Member
|
|
Member
Joined: Mar 2005
Posts: 245 |
I did pings and have an average latency of less than 40ms
NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0
MITEL 5000 3300 NuPoint
"If I had known it would turn out like this, I would have become a locksmith"
Albert Einstein
|
|
|
|
|
Joined: Oct 2004
Posts: 59
Member
|
|
Member
Joined: Oct 2004
Posts: 59 |
This is known issue with the Norstar gateways when using entension to extension dialing. As far as i know there is no fix.
|
|
|
|
|
Joined: Mar 2005
Posts: 245
Member
|
|
Member
Joined: Mar 2005
Posts: 245 |
Thanks, at least I walk away with more knowledge of Nortel quirks that I had before...
NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0
MITEL 5000 3300 NuPoint
"If I had known it would turn out like this, I would have become a locksmith"
Albert Einstein
|
|
|
|
Forums84
Topics94,515
Posts639,965
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
137
guests, and
41
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
