|
|
|
|
Joined: Oct 2006
Posts: 9
Member
|
OP
Member
Joined: Oct 2006
Posts: 9 |
I am trying to add another Dial Intercom Group to one of my switches. Does anyone know what the process is. I am adding it to an 11cCompact 23.55. I was in load 15, but the directions that I was given don't seem to work.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 17
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 17 |
LD 15 only shows the max number of DIGs. On the set you're programming put in key number DIG XX member and ring or voice.
|
|
|
|
|
Joined: Oct 2006
Posts: 9
Member
|
|
OP
Member
Joined: Oct 2006
Posts: 9 |
I can program the set to DIG 1 but cannot program the set to DIG 2. I am splitting floors in a building and am trying to add this set to group 2. But there is no DIG 2?
|
|
|
|
|
Joined: Oct 2006
Posts: 9
Member
|
|
OP
Member
Joined: Oct 2006
Posts: 9 |
Sorry...found the answer myself. LD 15 CHG FTR_DATA DGRP (from 1 to 3) had to add one more than what I was trying to program. If I added 2, I could not program in any DIG 2's, but if I added DGRP 3, I could program in my second set of DIG's......if that makes sense?
|
|
|
|
Forums84
Topics94,294
Posts638,835
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
114
guests, and
332
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)