sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Nortel Programing

I am trying to do some programing on a Nortel ver SP:30MHL07 CT+RTP I have a manual for a ICS 7.0... when i get into the programing **config and enter the password I get

A. Configuration
1 trk/line data
2 line access
3 call handling
4 miscellanious
5 system data
6 cantrex access

B. General Admin
1 speed dial
2 names
3 time & date
4 direct dial
5 capabilities
6 service modes
7 passwords
8 log defaults
9 call services

C. Set Copy

D. Maintance
1 system ver
2 port/dn status
3 module status
4 diagnostics
5 system test log
6 system admin log

I need to add apearence and ringing for three lines to one telephone and since my tech manual and the system don't seem to match i am lost. any help in stearing me in the right direction would be wonderful

thanks

"Line Access" is where you want to be.

I gave the phone access to the lines but they don't show up under any keys and they don't ring...

George, Do you have the necessary overlay used to navigate Heading, Show, Back & Next ?

This system is not a 7.0. This is some DR software probably.
MT told you to go to "Line Access" and assign those line to ring on exts for the appearance.

SP:30MHL07

Is a modular DR4

i have the right overlay but i don't think i have the right program information. I gave the station access to the lines but the lines don't appear on the phone, I need to know how to program the lines to appear and ring on that phone.

I believe it's time to call in a technician that knows Nortel....Sorry to be blunt, but we've already told you what to do and where to go to do it.