|
|
|
|
Joined: Jun 2007
Posts: 41
Member
|
|
Member
Joined: Jun 2007
Posts: 41 |
I have a BCM 50 & a DMC unit with DMC handsets. The problem I have is that in the Bcm programming for the sets, I have 2 DMC handsets programmed, except when it gets to the column where it says Intercom Keys it has an N/A and I cannot change it so that it has 1 intercom key. It will not let me change it. So, I cannot get an intercom path between the DMC handset and any other phone in the system. HELP!!!! :confused:
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jun 2008
Posts: 30
Member
|
|
Member
Joined: Jun 2008
Posts: 30 |
There are no keys for line appearances or intercom keys on the DMC handsets, therefore you need to have the prime line set to I/C or you wont be able to call set to set. I suggest having the people using the DMC 74xx sets use a line pool access code to dial outbound.
|
|
|
|
|
Joined: Jun 2007
Posts: 41
Member
|
|
Member
Joined: Jun 2007
Posts: 41 |
Hello, I am still having a problem with no voice path between the 74xx and any other phone. I have the 74xx set with 1 intercom key and the prime line set to intercom. Any other thoughts or what am I missing. Help
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
Check for Hands Free set to Auto.
|
|
|
|
|
Joined: Jun 2008
Posts: 30
Member
|
|
Member
Joined: Jun 2008
Posts: 30 |
Did you do a Cable Delay Measurement on the basestations
|
|
|
|
Forums84
Topics94,513
Posts639,938
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (R4+Z),
136
guests, and
44
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
