|
|
|
|
Joined: Jul 2006
Posts: 43
Member
|
|
Member
Joined: Jul 2006
Posts: 43 |
I've programmed DIDs with a T1 before i.e. line 145 to ext 221, line 146 to ext 222, etc. with received digits but I'm having some issues with a customer that has a 4-channel DID circuit.
My DID lines are 13, 14, 15, and 16. Do I still utilize target lines that are higher then that i.e. line 75, 76, etc. or do I assign these lines (13-16) to specific phones?
The customer has 16 DIDs so do I assign each line to 4 phones to spread it out?
I know my way through the progamming but I'm having some issues with this. Thank you for any assistance you might be able to provide.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
You say the lines show as 13-16 so you have an 8x24!
Make sure program says the card is DID. Set your received digits. Begin with your first target line 081. Do your number translation to target line then assign the target line/s to a set!
|
|
|
|
|
Joined: Jul 2006
Posts: 43
Member
|
|
Member
Joined: Jul 2006
Posts: 43 |
I'll try that. Thanks for your help.
|
|
|
|
Forums84
Topics94,515
Posts639,965
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
133
guests, and
28
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
