Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Apr 2005
Posts: 135
Member
OP Offline
Member
Joined: Apr 2005
Posts: 135
I have a customer that has two buildings with a MISC connecting both buildings. They
wanted the second building to have its own phone system and still be connected with the
other building. So we installed another MISC and E&M cards. I have my target lines built and the E&M lines in pool B. when I call from one switch to the other switch using pool B the call will only ring on the prime set. If I go to control set for lines and have no prime set for the E&M lines the call from the 1st switch will ring from the phone that’s making the call but the 2nd switch wont ring anywhere. When I put the prime set back in to play with the E&M lines the call will only ring on the prime set. This is the way its works if switch 1 calls switch 2 and visa versa. I have the target lines setup as if they were DIDs. Any suggestions? It’s been about 8 years since I’ve worked with E&M lines.


You don’t drown by falling in the water. You drown by staying there.
Advertising Sponsor Spot 2
Joined: Jan 2005
Posts: 15,290
Likes: 3
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Online Content
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,290
Likes: 3
If these are copper 4 wire E/M circuits, do you have your E & M leads reversed between the systems?


Ed Vaughn, MBSWWYPBX
Joined: Apr 2005
Posts: 135
Member
OP Offline
Member
Joined: Apr 2005
Posts: 135
Yes sir i do


You don’t drown by falling in the water. You drown by staying there.
Joined: Oct 2005
Posts: 4,681
Member
Offline
Member
Joined: Oct 2005
Posts: 4,681
Have built your routes and destination codes?

And what version of software are the MICS's?


Marv CCNA, CTUB
TeleMarv Services
Providing telecommunication solutions in Ottawa Canada since 1990
http://www.telemarv.ca
Specializing in Nortel Norstar, BCM and Allworx VoIP Servers
Joined: Feb 2007
Posts: 2,473
Member
Offline
Member
Joined: Feb 2007
Posts: 2,473
E&M Access code is to grab a dial tone from another switch to be able to dial any extension in that building or use any other features including outgoing calls from that switch. You can't use your internal features by using E&M card. With P2P PRI you can connect 2 switches together by ordering MCDN key codes for Networking advance features such as Centralized VM, Transfer across the network and etc.

Joined: Nov 2008
Posts: 299
Member
Offline
Member
Joined: Nov 2008
Posts: 299
I remember them, but only ever dealt with them in SL-1/Meridian 1 situations.


Dylan. SATUBAW (Some American techs use BIX as well)!
Joined: Nov 2004
Posts: 222
Member
Offline
Member
Joined: Nov 2004
Posts: 222
Do you have the E&M lines set to Auto Answer?

Joined: Apr 2005
Posts: 135
Member
OP Offline
Member
Joined: Apr 2005
Posts: 135
Sorry guys I haven’t been back to the site yet. I’ll be back to the site after Thanksgiving and let you know what i find.
Have a good holiday.


You don’t drown by falling in the water. You drown by staying there.
Joined: Dec 2001
Posts: 228
Member
Offline
Member
Joined: Dec 2001
Posts: 228
Try checking on Signaling, Wink vs Immediate.
What about DTMF senders, and receivers at both ends?
DID translation Tables set up?
When you access the Trunk do you get Dial tone?

Joined: Aug 2008
Posts: 258
Member
Offline
Member
Joined: Aug 2008
Posts: 258
do a group


Kevin
Centennial Telecom
Las Vegas
(702) 689-4090

Moderated by  MooreTel, NTlayoff 

Link Copied to Clipboard
Advertising Sponsor
Most Recent 5 Post
Saying good by to all the rest of my toshiba
by SSPhone - 05/07/21 04:28 PM
IP Office 500 V2 crash
by Mercenary Roadie - 05/07/21 08:24 AM
Random characters on screen
by dougster - 05/06/21 06:49 PM
How to subscribe to get full access.
by Ruben - 05/05/21 09:29 PM
OS UNI Card Version Question
by RM SYSTEMS - 05/04/21 04:53 PM
Popular Topics (Views)
Forum Statistics
Forums93
Topics94,377
Posts639,660
Members49,454
Most Online5,661
May 23rd, 2018
Today's Birthdays
KWH, PulseDial
Newest Members
Andrea Sau, eos90066, Sonic, ERA, Mackino
49,454 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
defencebyte.com
Antiransomware
Global Test Supply
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 48
pvj 18
Ruben 15
bditech 11
Phone.com 300x250
300x250 Your Business Phone Service in the Cloud
www.aweber.com
landing page builder
Linked Banner to your Product or Website
NordVPN
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Who's Online Now
24 members (mbhydro, Curlycord, justbill, hitechcomm, gelehu, Ruben, JBean3329, sundance, MooreTel, Yoda, Skunky, dexman, BobRobert, Carl Navarro, Touch Tone Tommy, EV607797, RATHER BE FISHING, nortelvoip, Mercenary Roadie, hbiss, nameless, nfcphoneman, newtecky, pvj), 175 guests, and 82 robots.
Key: Admin, Global Mod, Mod
vpnproxymaster
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners
landing page builder Antiransomware 300x250 Your Business Phone Service in the Cloud