|
|
|
|
Joined: Mar 2006
Posts: 193
Member
|
|
Member
Joined: Mar 2006
Posts: 193 |
I have installed many Norstar ksu’s over the years but next week I have been asked to install my first PRI. It will be installed in a 0x32, the s/w will have been upgraded to a 7.0 and I will install the card in the 1st slot (far r/h side) of the main ksu.
They currently have 2 x DID cards which will be removed along with the analog trunk cards.
Any tips that I should be aware of? Is the prg straight forward? Are there unusual circumstances that I should be aware of?
Thanks for your help.
Chris
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
You didn't mention that you have the PRI enabler keycode or that you will be installing the required service card or a combo expansion cartridge.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Mar 2006
Posts: 193
Member
|
|
Member
Joined: Mar 2006
Posts: 193 |
Sorry Marv,
Yes I have the PRI enabler keycode, I will be installing the PRI card and they already have a 6 prt fiber exp card.
Chris
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
Chris, make sure it is COMBO card not just regular 6 port expansion because you need a clock for T1. Otherwise it is straight forward Programming. You do Hardware set up, then your Pool assignment follow by Routing.
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, KRRath),
301
guests, and
49
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
