|
Joined: Nov 2003
Posts: 1,310
Member
|
OP
Member
Joined: Nov 2003
Posts: 1,310 |
Just tried Silent Monitor for the first time (MICS 7.1, CP 150 w/Call Center). Silent Monitor works nicely, but, after hanging up/cancelling the call I was monitoring, both IC buttons on the monitor phone remain lit (solid, not flashing). NOTHING I do would "un-stick" the buttons. When I press the buttons, I get the error tone + a message in the window (don't remember now...either "no free lines" or "xxx unavailable". I tried disabling the port of the set, but it wouldn't allow it. I disabled the module in programming, but the buttons remained active when I re-enabled. Finally had to re-boot the system to get the buttons un-done. Any ideas? :confused:
D. Ocean Miami, FL
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
Member
Joined: Feb 2007
Posts: 2,473 |
Are those phones HG members? Have you start Monitoring in HF mode, then moved to handset and then hung up?
|
|
|
|
Joined: Nov 2003
Posts: 1,310
Member
|
OP
Member
Joined: Nov 2003
Posts: 1,310 |
D. Ocean Miami, FL
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
138
guests, and
380
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|