|
|
Joined: Nov 2009
Posts: 3
Member
|
OP
Member
Joined: Nov 2009
Posts: 3 |
I just joined the Forum to see if someone can help me out or have an idea how i can resolve the issue i'm having with our BCM 5.0; hopefully one of you guys would be able to provide me with some ideas... We have two BCM Servers connected with each other. One, has three PRI and the other one has two PRI. The way our reseller conifigured was two allow both BCM Server function as a single one, so every time i place an outbound call I use a line from Server 1 and another one from Server 2. Anyways, i'm getting a 'User Call Reject' on the LCD Panel of the Nortel every time a User tries to place an Outbound call (Long, Local, Toll free number...it doesn't matter). This has happened very early in the morning when there is only 2 o3 5 Users utilizing the Nortel phone system, so is not an issue of running out of lines or Channels on the PRIs. At the same time i get an error on the Server 1 Error 327 'Slip Overflow' maybe its a clocking issue...I don't know...i have tried all types of configurations, Please HELP!! Thank you, Ronnie [email protected]
I never give up!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jun 2006
Posts: 8,729 Likes: 2
Moderator-Nortel, Computers, General
|
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,729 Likes: 2 |
1st,  to the board. 2nd, no need to post here, then send me two emails....posting here is enough  3rd, keep your pants on & one of the BCM pros will post soon with a response. I have no training on the BCM yet.
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
As Dave said, and pull back on the reins. At the same time i get an error on the Server 1 Error 327 'Slip Overflow' This is your answer. The PRI is slipping out of sync. 99% of the time this is a carrier issue.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Nov 2009
Posts: 8
Member
|
|
Member
Joined: Nov 2009
Posts: 8 |
Ensure if you have the call by call limits set to the maximum outgoing channels available in each system.
Under Line pools you could find this setting.
|
|
|
|
|
Joined: Nov 2009
Posts: 3
Member
|
|
OP
Member
Joined: Nov 2009
Posts: 3 |
Hey CSS_ETSO6,
On Server 251 I have the following
Dial Plan>Destinations Codes:
2A>Is using Normal Route>013
37A>Is using Normal Route>007
38A>Is using Normal Route>007
39A>Is using Normal Route>007
62>Is using Normal Route>011
9A>Is using Normal Route>002
Now I think the problem might rely within 9A since that's what we use to dial out (Local, Long Distance and International).
Route 002 is Using line Pool O and when i check Line Pool O it doesn't have the Tab 'Call by Call Limits' next to the DNs Tab.
However, Block A and Block C has the 'Call by Call Limits' Tab.
Any ideas why Pool O Doesn't have this Tab within?
I never give up!
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
Pool O is a POTS lines. Make sure you have lines in it and they all have a dial tone.
|
|
|
|
|
Joined: Nov 2009
Posts: 3
Member
|
|
OP
Member
Joined: Nov 2009
Posts: 3 |
We don't have POTS lines, except for the Fax Machines...
Umm Maybe that's why we are having problems. Which Line Pool should I use for 9A>Route 002?
I never give up!
|
|
|
|
Forums84
Topics93,959
Posts637,375
Members49,702
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
37
guests, and
38
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
