|
|
|
|
Joined: Jun 2007
Posts: 41
Member
|
OP
Member
Joined: Jun 2007
Posts: 41 |
We have an Opt. 11c system that took a power hit. We got the system back up and working by replacing the ssc card. The problem we now have is that we cannot talk to the switch thru VT terminal, laptop or thru the modem. We hooked up thru Port 0, but still cannot talk to the switch. On the VT terminal when we do an INI we can see the system reload and it prints out AUD from time to time. We think it might be the backplane on the cabinet. Anyone else have any ideas. Help.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Nov 2009
Posts: 7
Member
|
|
Member
Joined: Nov 2009
Posts: 7 |
Hello There,
Did you check to see if the baudrate is set properly,and did you try to connect thru tty0,1?and if you can login into the switch?
Thanks,
CSS_ETS03
|
|
|
|
|
Joined: Jun 2007
Posts: 41
Member
|
|
OP
Member
Joined: Jun 2007
Posts: 41 |
Thanks for the help. We determined that the backplane on the main cabinet was damaged in the storm. We replaced the cabinet last night and everthing is working again.
|
|
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Bushmills),
138
guests, and
350
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
