|
|
Joined: Oct 2008
Posts: 298
Member
|
OP
Member
Joined: Oct 2008
Posts: 298 |
Can someone tell me what overlay to use to remove an E&M trunk card from an Option 11?
I tried doing it in 20 and when I enter: OUT CARDMLT TN It comes back with a SCH error saying I am in the wrong overlay. Doesn't work in LD 14 either. I need to remove the card to install a digital line card.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 17
Admin
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 17 |
Remove all trunk ports. Replace E&M card with with digital board. Initialize and program away.
|
|
|
|
Joined: Jan 2010
Posts: 1
Member
|
Member
Joined: Jan 2010
Posts: 1 |
Trunks are built and removed via LD 14, whether they are analog or digital. I assume this is a TIE trunk, since the card is E&M. Print a TNB of one of the trunk TN's to see what type it is, then access LD 14 and out it.
REQ: OUT TYPE: TIE or other trunk type like COT, DID etc.. TN: TN of the trunk to be removed
|
|
|
|
Joined: Oct 2008
Posts: 298
Member
|
OP
Member
Joined: Oct 2008
Posts: 298 |
Worked like a charm.
Thanks guys.
|
|
|
Forums84
Topics94,299
Posts638,875
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
119
guests, and
313
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|