Change Ext to DID

Print Thread

Rate Thread

Change Ext to DID #145829 02/12/10 08:46 AM
Joined: Jan 2010 Posts: 13 Minnesota gknoll Member
gknoll Member Joined: Jan 2010 Posts: 13 Minnesota	Greetings all. I know I can change the extension numbers when the system is first set up, but what I want to knw is can I change a single extension number from what it is to something differant. For example, can I change extension number 4570 to 4583 so that the extension matches the DID number of 4583 where 4583 does NOT exist as an extension already in the system? Just to be clear, Ext 4570 is a valid extension DID 4583 is not a valid extension I want to change extension 4570 to match DID 4583. Thank you Greg

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: Change Ext to DID #145830 02/12/10 09:30 AM
Joined: Feb 2005 Posts: 1,615 Likes: 1 Toronto, Canada Curlycord Member
Curlycord Member Joined: Feb 2005 Posts: 1,615 Likes: 1 Toronto, Canada	Change DN under System Programming =---()))))))))---= www.curlycord.com Toronto, Canada

Re: Change Ext to DID #145831 02/12/10 09:52 AM
Joined: Dec 2001 Posts: 232 Fremont CA USA Avidcomm Member
Avidcomm Member Joined: Dec 2001 Posts: 232 Fremont CA USA	After that you may need to reprogram the Trunk ringing on that extension. www.avidcomm.com

Re: Change Ext to DID #145832 02/12/10 11:14 AM
Joined: Jan 2010 Posts: 13 Minnesota gknoll Member
gknoll Member Joined: Jan 2010 Posts: 13 Minnesota	So if I understand you correctly, I can go into the system programming area and select to "Change DN's" and I will be able to enter the number I want in the "New DN" prompt and it will change it even though the number I want does not actually exist as an extensin number?

Re: Change Ext to DID #145833 02/12/10 11:46 AM
Joined: Oct 2005 Posts: 4,685 Likes: 4 Ottawa, ON. Canada telemarv Member
telemarv Member Joined: Oct 2005 Posts: 4,685 Likes: 4 Ottawa, ON. Canada	As long as the new DN does not conflict with anything. 4583 is probably a B2 DN, not that it matters. Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990

Re: Change Ext to DID #145834 02/12/10 11:55 AM
Joined: Jan 2010 Posts: 13 Minnesota gknoll Member
gknoll Member Joined: Jan 2010 Posts: 13 Minnesota	Got it. I went ahead and did it and all is well. Thank you guys for your responses.

Moderated by MooreTel

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Change Ext to DID