|
|
Joined: Aug 2009
Posts: 3
Member
|
Member
Joined: Aug 2009
Posts: 3 |
I am having trouble trying to change the time on a Meridian M8X24 system. I checked the stickied post but the feature codes do not work.
When I try FEATURE **TIME nothing happens at all as if there is no code for that. With FEATURE **ADMIN I get access denied, same with **CONFIG.
I've tried from four different phones and had the same result with each, is there a specific port that I have to be connected to in order to access the Administrator settings? I have a 25 port switch, most of them are in use for desktop phones and two of them are for a Callpilot.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Oct 2004
Posts: 376
Member
|
Member
Joined: Oct 2004
Posts: 376 |
Make sure your using a 7316 or 7310 phone for programing.
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Norstar 8x24 was before the F**TIME - so you can't use that.
And as Bob said - Use a phone with MORE than 8 buttons.
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
Forums84
Topics94,512
Posts639,933
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
2 members (justbill, Toner),
89
guests, and
33
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|