|
|
|
|
Joined: May 2006
Posts: 117
Member
|
|
Member
Joined: May 2006
Posts: 117 |
Have a 450 with ip sets not sure how this works
Im using the same drop and customers computers are on for both computer and IP Set. So there DHCP server gives all there computers IP address. Lets say 192.168.1.100 to 200. Does the customers server supply the ip sets with IP address or do I tell the BCM to use IP address say 192.168.1.200 to 250
Thanks
Rick
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
you can do it either way, but I prefer to give static IPs to the sets and turn off DHCP on the BCM. How many sets do you have? Like you said, make sure your static and DHCP ranges don't over lap.
|
|
|
|
|
Joined: May 2006
Posts: 117
Member
|
|
Member
Joined: May 2006
Posts: 117 |
I have about 40 ip sets. So I would use a static ip for each ip set that would be outside the range that the customers server would assign there computers and disable the DHCP in the bcm
Oh one other quick one is there any additional programming when im using the same lan drop for both ip set and customers computer.
Thanks
|
|
|
|
Forums84
Topics94,516
Posts639,970
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
151
guests, and
36
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
