|
|
|
|
Joined: Dec 2009
Posts: 23
Member
|
OP
Member
Joined: Dec 2009
Posts: 23 |
I have an option 11c with one way communication to the terminal. I can see the data coming from the machine but I can't talk to it. I took the terminal back to my office and tested it and it works fine. Does anyone know which card controls the serial port?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jun 2007
Posts: 627
Member
|
|
Member
Joined: Jun 2007
Posts: 627 |
there should be a 3 headed cable that has 3 rs232 connectors.
Normally a modem would be on connector 0
Your local laptop or admin terminal would be on connector 1
I have seen those cables go bad, but is uncommon. Try moving the terminal to a different connector. Connector 2 usually is not programed to do much.
|
|
|
|
Forums84
Topics93,970
Posts637,430
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, KRRath),
83
guests, and
39
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
