| Joined: Mar 2001 Posts: 1 Member | OP Member Joined: Mar 2001 Posts: 1 | Does any one know how to activate the CDR port on a KXTD-1232-4? | | | | Joined: Mar 2001 Posts: 2 Member | Member Joined: Mar 2001 Posts: 2 | You probably want software to "massage" the data, but raw data is available. Default is 9600, 8,N,1 but most techs set it to 19.2,8N1
You can view the output in Hyperterminal!
George W. Peffer comctr.com
| | | | Joined: Aug 2001 Posts: 12 Member | Member Joined: Aug 2001 Posts: 12 | Once the PC ar printer is connected to the RS232 it takes about 5 seconds before you'll see any SMDR data. The RS232 on the KX-TD is used for SMDR and programming. A null modem adapter is required, if your using a standard DB9 to DB25 cable. | | | Forums95 Topics94,282 Posts639,048 Members49,425 | Most Online5,661 May 23rd, 2018 | |
23 members (Harry76, Ruben, BJW86, jab1780, BobRobert, Coral Tech, Yoda, MooreTel, RM SYSTEMS, teldata1, metelcom, Skunky, sundance, EV607797, Touch Tone Tommy, phonemeister, byacey, dexman, RATHER BE FISHING, justbill, hitechcomm, Mercenary Roadie, newtecky),
255
guests, and
53
robots. | Key: Admin,
Global Mod,
Mod | | | |