Panasonic DBS72 analog ports|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Panasonic DBS72 analog ports #151885 07/21/04 06:41 PM
Joined: Jul 2004 Posts: 17 Portland, OR, USA LowVolt OP Member
OP LowVolt Member Joined: Jul 2004 Posts: 17 Portland, OR, USA	I have a dbs72 that the analog ports seemed to have stopped working. I went into station programming and changed the device type to 1, I have seen DBS ports stop working when shorted and you have to go in and change the device type. This didn't help. When I put my but set on the ports I get system dialtone but I can't break it even to dial another ext. There was a Visa machine on this port and I'd like to get it working again. Any ideas anyone?

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Panasonic DBS72 analog ports #151886 07/22/04 09:36 AM
Anonymous Unregistered
Anonymous Unregistered	The DTMF (MFR) card may be bad. Can you break dial tone with your butt-set set to rotary/pulse?? If so, replace your MFR card. (I've got 'em in stock) -Joe 775 338 9292

Re: Panasonic DBS72 analog ports #151887 07/28/04 05:57 PM
Joined: Jul 2004 Posts: 17 Portland, OR, USA LowVolt OP Member
OP LowVolt Member Joined: Jul 2004 Posts: 17 Portland, OR, USA	I tried the craft set on rotary/pulse and still could not break dialtone. What can I try next?

Moderated by Carl Navarro, OBT

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems Panasonic DBS72 analog ports