sundance-communications.com Forums Telephony Discussion Phone & VoIP Systems Panasonic Telephones & Systems Headset

I need to be able to toggle between handset & Headset. I've looked in the manual and it says to refer to Station Programming, but I cant find it. Any help would be appreciated.

------------------
| Capitol Communications | Telephone Systems

Cap, you didn't state what system you have but if it's a digital TD system the press intercom 99, 91 for handset, 92 for headset. There is no toggle that I know of.
I believe all this does is allow you to use the speakerphone button to answer the calls.
as I remember it will also disable the auto answer as that will come through the headset so you won't hear any pages through that set if your away from it.
If I remember correctly it always made more sense to just use the button on the headset controller to turn it on and off.
Is this a Plantronics?

Thanks for the quick reply. It's a KXTD-1232 and a GN Netcom Amp/Headset.


------------------
| Capitol Communications | Telephone Systems

I think Mr.Gemini meant to say is press the Program button, dial 99, then 91 for handset and 92 for headset.

"you are correct sir" Thank you, Gem

[This message has been edited by MrGemini (edited April 25, 2005).]